MASTER PARTS:

1. SILICONE PASTE PUSH OUT MACHINE
BY HYDRAULIC SYSTEM.
2. FILLING MACHINE


MACHINE SIZE

HYDRAULIC PUSH OUT MACHINE :
LENGTH:1.2M WIDTH:1.5M HIGH:3.0M.

FILLING MACHINE: LENGTH:2.3M WIDTH:1M HIGH:1.83M.

MASTER FUNCTION:

MAX PRESSURE:35TONS
FILLING RECYCLING CAPACITY PROBABLY:18~26 PCS/MIN.
FILLING VOLUME TOLERANCE ±0.5％.

 

 

MAIN EQUIPMENT:
HYDRAULIC SYSTEM FOR SILICONE PUSH OUT MACHINE:

<1>MAX PRESSURE ABILITY 35TONS.
<2>HYDRAULIC MOTOR:7.5HP OIL PRESSURE 140KG/CM2.
<3>HYDRAULIC OIL:#68
<4>COOLING SYSTEM TO CONTROL OIL TEMPERARURE
<5>OIL TEMPERATURE MUST KEEP BELOW 50℃
<6>CYLINDER DIAMETER 180Ø,LENGTH 1100MM MAX PRESSURE 140KG/CM2.
<7>THE CIRCLE PALLET OF SILICONE PRESSURE HAVE TWO O TYPE RING WHICH MADE BY
           RUBBER DO NOT USE SHARP-POINTED TOOLS OR FIRE TO CLEAN
<8>THE SILICONE TUBE CLIP-ON HOLDER MUST OPERATOR OTHERWISE.
           THE HYDRAULIC CYLINDER AXLE CENTER WILL BE DESTROY.
<9>THE O TYPE RING. WHICH MAKE FROM FINESIL TECHNOLOGY, EACH ONE


FILLING MACHINE DEVICE:   CARTRIDGE PLACE SHELF
1.CARTRIDGE PLACE SHELF
2.PLUNGER SUPPLY SYSTEM
3.CARTRIDGE MOVING SYSTEM
4.PLUNGER PUSH UNIT
5.VOLUME MEASUREMENT UNIT
6.FILLING NOZZLE PARTS
8.PRINTER (OPTION)
9.PRINTING ROLLER UNIT(OPTION)		   MADE BY STAINLESS STEEL SUS#304;1.5MM THICKNESS
CAPACITY:a BAX
PLUNGER SUPPLY SYSTEM
  1. PLUNGER SUPPLY SYSTEM DIVIDE THREE PARTS:
  2. (1)PLUNGER STORE TANK
  3. (2)PLUNGER BUFFER SLIDE
    (3) PLUNGER FIRM MOLD

 

PLUNGER STORE TANK:

(1) PLUNGER STORE TANK,ABILITY:500PIECE

(2) PLUNGER BUFFER SLIDE:

BUFFER SLIDE MADE BY STAINLESS STEEL HERE ARE SOME WOOL INSIDE TO ABSORB OIL AND ABOUT 20 PIECE BUFFER。

(3) PLUNGER SUPPORT MOLD:

PLUNGER SUPPORT MOLD BY INCOOPERATE INTO ASSEMBLY。

MAIN PARTS: PUSH CYLINDER(FESTO 63Ø*200MM)
PLUNGER CLIP CYLINDER (FESTO 12Ø*10MM)
PLUNGER OK/NG DETECT CYLINDER (FESTO 8Ø*80MM)

THE AIR BUBBLE OF INSIDE CARTRIDGE CAUSE OF AIR PRESSURE SO MUST ADJUST
SUITABLE.THE FUNCTION OF PLUNGER OK/NG DETECT CYLINDER IS TO CHECK SOME ERROR OF PLUNGER IF THERE ARE SOME TROUBLE HAPPEN IT WILL SHOW ON TOUCH SCREEN & THE MACHINE STOP.

CARTRIDGE MOVING MACHINERY THE POWER IS BY CYLINTER

SILICONE MEASURE UNIT:
SILICONE MEASURE UNIT DIVIDE TWO PARTS:
1.MEASURE TANK
2.THREE WAY VALVE

------------------------------------------------------------------------------------------------------

(1) MEASURE TANK:
HYDRAULIC CYLINDER 63Ø*200MM IS THE MAIN PUSH POWER .
SCREW NUT ABOVE HYDRAULIC CYLINDER CAN ADJUST SILICONEVOLUME .
SURE-TANK100ØDIAMETER AND PISTONE ARE TING CHROMIUM . TTENITON TO INSIDE EASURE-TANK .KEEP CONE OIL ON FULL TO
AVOID PISTON & MEASURE-TANK TORY.

(2) THREE WAY VALVE:
THERE IS A COPPER AXLE CENTER INSDE THREE WAY VALVE.DO NOT KNOCK ON IT SURFACE OTHERWISE IT WILL LOSE EXACT TOLERANCE .THE THREE WAY
VALVE INSIDE SURFACE CAN NOT TO DESTORE WHEN YOU CLEAN SILITONE.
THERE ARE TWO PACKING ORING BOTH SIDES THE THREE WAY VALVE WHAT CAN AUTO SUPPLY OIL TO LUBRICATE & AVOID SILICONE TO CONGEAL.

(3) THE THREE WAY VALVE IS MADE BY STAINLESS STEEL.

 

 

 

 

THE FILLING NOZZLE IS MADE BY STAINLESS STEEL.THE INNER CORE IS TO CLEAN。

1.THE FILLING MACHINE CONTROL SYSTEM USE MITSUBISHI PROGRAM LANGUAGE
CONTROLLER(PLC) + MAN MACHINE INTERFACE(MMI).

2.THE FUNCTION OF MAN MACHINE INTERFACE(MMI):
DURING PRODUCTION.IF THERE ARESOMETHING ERROR THE PROGRAM
LANGUAGE CONTROLLER (PLC) WILL STOP WHOLE SYSTEM AND SHOW ERROR MESSAGE ON MAN MACHINE INTERFACE(MMI) THE MMI CAN RECOMMEND
HOW TO TROUBLE SHOOTING.OPERATOR MUST SOLVE THE PROBLUM AND THEN CONTINUE PRODUCTION.